Replacement Graphics for Fin Flag
Reorder just the printed Fin Flag graphic - keep the pole and base you already have
Product Description
A fresh Fin Flag graphic in its curved, sail-like beach-and-event shape, printed and finished to the original spec so it drops straight onto existing hardware. It’s the low-cost way to refresh a design, replace a weathered flag, or run a new campaign — and for a reseller, it’s repeat business with no hardware to buy again.
How to reorder
Order the same size and orientation as the original — or, if it came from us, just quote your original order number and we’ll match it. Upload your artwork (or ask us to reprint the file on record), and we print, finish, and blind-ship it to you or straight to site.
Artwork & templates
Use the same templates as the main product — available for every size and orientation in InDesign, Illustrator, EPS, and PDF, set up at 20% scale. Log in to download them, then build to the exact template size: outline all fonts, embed all images, keep important content inside the safe area, run background color out to the bleed line, and export as PDF (preferred), AI, or EPS. Each size differs in shape and proportion, so the template must match the size ordered.
Need sizes, poles, bases, or full specs? See the Fin Flag product page.
View Fin FlagArtwork Templates
Template information
Artwork templates are available for every size and orientation in InDesign, Illustrator, EPS, and PDF, set up at 100% scale. Log in to download them, then build to the exact template size: outline all fonts, embed all images, keep important content inside the safe area, run background color out to the bleed line, and export as PDF (preferred), AI, or EPS.
These templates were last updated on 08/14/2026. If you have previously downloaded templates for flags before this date, please disregard them and use these latest versions. If old templates are used, this will likely delay any orders.
These templates will help you create your design at the correct size, shape and proportion for the flag, and are setup at 100% scale of full size.
Please note, each size differs in shape and proportion. The template used must match the size ordered.
Shape
- The red line is the bleed line. Artwork must extend to this line. The area in between this line and the safe area line must only be used as a quiet area.
- The blue line is the finished line. This is the approximate perimeter of the visible graphic area, after the graphic has been fitted to the unit.
- The green line is the safe area line. Important content (text, logos etc.) must be kept within this line.
- The grey line is the flag sleeve. This shows the location of the elasticated flag sleeve, when finished and attached.
Layers
Please note, our InDesign, Illustrator and EPS templates contain a locked guide layer that is set to be non-printing. Any artwork elements that are put on this layer will not be included in exported PDFs, and will not be printed. Please check your exported artwork before sending it to us. Our PDF templates contain the same locked guide layer, but it is set to be a printing layer - it must be deleted from your file before exporting your design.
- Guide (Non-Printing) (locked). Must not contain any of your design elements. May be deleted, if desired.
- Design. Must be used to create and supply your design.
Artwork Requirements
Flag artwork must be supplied:
- At the exact size of the template
- With all fonts outlined
- With all images embedded
- With all design elements on the Design layer
- With all important content inside the safe area
- With background/quiet content all the way to the bleed line
- With none of the template guide lines included or flattened
- With no crop marks, bleed marks, colour bars or other registration marks present
- As either PDF (preferred), AI or EPS format
- With exported files checked that all design elements are included
- With both front and back designs included (applies only to double-sided flag templates)
When supplying your print-ready artwork, please follow our artwork requirements.