Names vary shop to shop, so choose by outline. Every shape prints in Small, Medium, Large, and Extra-Large, facing left, facing right, or double-sided.
ADVERTISING FLAGS · WHOLESALE
Get your client seen from the street.
Five flag shapes - feather, teardrop, blade, fin, and crest - printed to order in four sizes, single or double-sided. Dye-sublimation color built for outdoors. Pick a shape below.
- THE RANGE
Pick your shape
Feather
The classic right-angle shape - the most usable print area of the range.
Teardrop
Droplet shape that stays taut and readable even with barely a breeze.
Blade
Slanted bottom edge for a bold, modern profile and strong vertical height.
Fin
The beach and aquatic-style shark-fin curve — distinctive against a lineup.
Crest
An elegant, vertically symmetrical shape for a more premium, formal look.
- CHOOSE YOUR FABRIC
Two flag fabrics - solid or mesh
Both are dye-sublimated for the same vivid color. The difference is how they handle wind.
Flag Polyester
The standard choice - a smooth, closely woven fabric that gives the punchiest color and a crisp face. Right for the large majority of sites.
AirMesh Polyester
A much lighter fabric perforated with small oval holes that let wind pass straight through. The pick for exposed, windy, or coastal spots where a solid flag would strain against its pole.
- BASES & HARDWARE
Where's it going? Match the base to the surface
Poles are included with every flag. Bases are the add-on - most buyers pick one by where the flag will stand.
Ground Spike
GRASS · SOFT GROUND
Drives into soil or turf for a solid, low-cost anchor outdoors.
Fits: all sizes
Cross Bases
HARD SURFACES
Weighted cross brace for paved ground where a spike won't go in.
Fits: all sizes
Water Bases
WINDY · EXPOSED
Fill with water or sand for maximum stability on any hard surface.
Fits: all sizes
Good to know before you add a base:
- Bases are ordered alongside a flag - if the hardware's for a past order, just quote the original order number.
- Bases are rated for single-sided flags; the extra weight of a double-sided flag isn't covered by warranty.
- Using a water base through a hard winter? Add salt to the water so it can't freeze and crack the base.
- ABOUT THE RANGE
A pole, a printed sleeve, and a base to suit the ground
An advertising flag is a simple, portable system: a flexible sectional pole, a printed fabric sleeve that slides over it, and a base chosen for wherever it's standing. The flexible upper section is what gives the flag its motion - it holds the graphic out and lets it sway to catch the eye, then curves rather than snapping when the wind picks up. Set up takes a minute or two, and the whole thing packs back into a carry bag.
Prints are dye-sublimated into the fabric, so color stays saturated through sun and rain and won't peel off the surface. A single-sided flag shows a softer mirror image on the reverse; a double-sided flag has a blockout layer stitched between two graphics, so both faces read correctly and neither shows through. Pick smooth Flag Polyester for the punchiest everyday color, or lighter, perforated AirMesh when the flag lives somewhere consistently windy.
- Facing left, facing right, or double-sided - your call per order
- Four sizes - installed height shown on each product page
- Built for outdoors - dye-sublimated, weather-resistant fabric
- Choice of material - printed on either our Flag Polyester or AirMesh Polyester material
- FLAG FAQS
The quick questions
Which shape should I pick?
It's mostly a look-and-visibility call. Feather gives the most print area; teardrop and fin hold their shape in low wind; blade reads bold and tall; crest looks the most formal. Because names differ between suppliers, go by the silhouette above rather than the label.
Single-sided or double-sided - will my text read backwards?
On a single-sided flag the reverse is a soft mirror of the front, so text runs backwards on that side. A double-sided flag has a blockout layer between two separate graphics, so both faces read correctly with no show-through. Pick facing left or facing right for single-sided to control which way the design reads.
Can they stay out in wind and rain?
Yes - they're made for outdoor use and the graphics are weather-resistant. The flexible pole is designed to flex in wind rather than fight it. However, consistent exposure to the elements will always degrade the material over time and will happen more quickly in harsher environments.
In storm-force conditions we would advise taking them down, and for consistently exposed spots choose AirMesh fabric and a Water Base.
Which base do I need?
Match it to the surface: Ground Spike for grass, Cross Base for small/medium flags on hard ground, Water Base for windy or exposed hard surfaces, Square Base for indoors, and the Tire Base for car lots. Larger flags need the all-size bases - the matcher above shows what fits.
How tall are they?
Four sizes - Small, Medium, Large, and Extra-Large - with the exact installed height listed on each shape's product page (heights vary a little by shape).
Do you offer replacement flags?
Yes. The pole and base outlast the fabric, so when a flag fades or a campaign changes your client reorders just the printed graphic to the same fit - blind-shipped like everything else.
TRADE ONLY · ALWAYS
Wholesale prices are for the trade. Period.
Venture Display supplies print resellers, sign shops, and agencies buying for resale. There are no public prices: every account is verified by hand before pricing unlocks, usually the same business day. Your margin stays yours, and your client stays yours.